Microsoft Virtual Wifi Miniport Adapter Fix

How do i fix Microsoft Virtual WiFI Miniport Adapter? I've tried the Reinstall driver/apply this fix troubleshooting technique from the prompt box that comes up. How to Enable a Virtual WiFi in Windows. By using some hidden tools in Windows, you can turn your laptop or desktop computer into a wireless hotspot. You can then connect your mobile devices to this hotspot and use your computer's shared. Aug 03, 2016  How to Enable Microsoft Virtual WiFi Miniport Adapter! Open CMD Run As administrator Just copy and past under link and press enter netsh wlan set hostednetwork mode=allow If your virtual adapter. It causes users cannot use it to connect to another network or create a WiFi hotspot. So it’s important to learn how fix it once it happens. Here in this article, we will be showing you two tried-and-true ways to fix Microsoft Virtual Wifi Miniport Adapter problem on your Windows 7. Please follow the easy steps with images below then. 5.On the next screen uncheck Show compatible hardware and then select Microsoft Virtual Wifi Miniport Adapter and click Next. 6.Select to anyway install the driver if asked.

Connecting to Multiple IEEE 802.11 Networks with one WiFi Card

(VirtualWiFi is an old project, and we started working on it in 2002. We are not actively working on this project since 2006, and will not be supporting this software at Microsoft Research. Thanks for your interest. However, the software and code will still be available for you to play around with. Also, check out the supported VirtualWiFi OIDs in Windows 7.)

About VirtualWiFi

VirtualWiFi (previously known as MultiNet) is a virtualization architecture for wireless LAN (WLAN) cards. It abstracts a single WLAN card to appear as multiple virtual WLAN cards to the user. The user can then configure each virtual card to connect to a different wireless network. Therefore, VirtualWiFi allows a user to simultaneously connect his machine to multiple wireless networks using just one WLAN card. This new functionality introduced by VirtualWiFi enables many new applications, which were not possible earlier using a single WLAN card. For example,

  • With VirtualWiFi, you can connect to a guest’s machine or play games over an ad hoc network, while surfing the web via an infrastructure network.
  • You can use VirtualWiFi to connect your ad hoc network, which may contain many nodes, to the Internet using only one node.
  • VirtualWiFi can help make your home infrastructure network elastic by extending its access to nodes that are out of range of your home WiFi Access Point.

We have explored several other applications of VirtualWiFi. The first application is called Client Conduit, which is a very useful tool for fault diagnosis and recovery in Wireless LANs. Client Conduit is a tool that provides a thin pipe of communication for disconnected clients to exchange diagnosis information with the back end servers. The thin pipe is achieved by running VirtualWiFi on the connected clients. These clients dynamically connect to disconnected clients over an ad hoc network, and send messages from them to the back end servers. VirtualWiFi enables this thin pipe without requiring the connected client to explicitly disconnect from the infrastructure network. A more detailed description of Client Conduit can be found in the paper titled: “Architecture and Techniques for Diagnosing Faults in IEEE 802.11 Infrastructure Networks“.

The second application of VirtualWiFi that increases the capacity of wireless ad hoc networks using orthogonal channels is called Slotted Seeded Channel Hopping (SSCH). SSCH uses VirtualWiFi to virtualize a wireless card with as many instances as the number of orthogonal channels. It then connects each virtual wireless card on a different orthogonal channel. Furthermore, SSCH proposes a novel scheme of partial synchronization that can be used with VirtualWiFi. The details of the SSCH protocol are described in another paper, titled: “SSCH: Slotted Seeded Channel Hopping for Capacity Improvement in IEEE 802.11 Ad-Hoc Wireless Networks“.

The third application of VirtualWiFi is called WiFiProfiler, which enables clients to cooperatively diagnose the root cause of various wireless problems. Clients, including the ones that are disconnected from the WLAN, use VirtualWiFi to form an information plane, which is different from the data plane (the WLAN). All clients then exchange configuration information over this information plane and use this information to diagnose the root cause of various wireless failures. The details of this idea are described in a technical paper, titled: “WiFiProfiler: Cooperative Diagnosis in Wireless LANs“.

We have implemented VirtualWiFi on Windows XP. The current version is a prototype implementation of VirtualWiFi, and we are in the process of making our software more robust to include more features. Your comments are very welcome.

Software Download and Contents

Software (Version 1.0)

(VirtualWiFi is an old project, and we started working on it in 2002. We are not actively working on this project since 2006, and will not be supporting this software at Microsoft Research. Thanks for your interest. However, the software and code will still be available for you to play around with. Also, check out the supported VirtualWiFi OIDs in Windows 7.)

Download VirtualWiFi. This bundle contains:

  • VirtualWiFi Binaries: Contains the files required for installing VirtualWiFi. If you will not modify the VirtualWiFi software, these files are sufficient.
  • VirtualWiFi Source Code: Contains all the VirtualWiFi source files. If you are interested in developing software that require VirtualWiFi functionality, you should modify the source code.

VirtualWiFi software is also available as part of the Academic Resource Toolkit. In addition to VirtualWiFi, this toolkit has the Mesh Connectivity Layer (MCL) software. MCL was developed as part of the Mesh Networking Project in the Networking Group at Microsoft Research.

Limitations of the VirtualWiFi Software Version 1.0

The current version of VirtualWiFi does not implement some features. Please keep checking this page for updates. The features not implemented in this release of VirtualWiFi are:

  • Buffering at remote nodes: We have prototyped this feature and presented the results. However, it is not implemented in this release.
  • WPA and 802.1X: The current version of VirtualWiFi does not support networks using WPA or 802.1X. Limited version of WEP is supported. Please contact Ranveer Chandra if you plan to use VirtualWiFi over a WEP-based network.
  • Multiple cards: The kernel implementation of VirtualWiFi supports multiple cards. However, we have not incorporated this support in the user level code of this release.
  • English version of XP: Some parts of the software will have to be done manually for non-English versions of the OS.

Installing and Uninstalling VirtualWiFi

Following are the prerequisites for using VirtualWiFi:

  • You should have administrative rights to install drivers and services on your machine.
  • Copy the VirtualWiFi binaries. The directory will have the following files:
    • VirtualWiFi.exe: This is the main installer file
    • vwifi.sys: This is the VirtualWiFi driver
    • vwifi.dll: This is the notify object dll for controlling the bindings of the VirtualWiFi driver
    • vwifip.inf, vwifi_mp.inf: These are setup files for the VirtualWiFi driver
    • VirtualWiFiSvc.exe: This is the file corresponding to the VirtualWiFi Service
    • VirtualWiFihelper.exe: This is a utility file for checking the correctness of VirtualWiFi
    • WirelessUtils.exe: This provides a command-line routine to connect to a wireless network. See below on how to use it.
  • Set Wireless Zero Configuration Service (WZC) in manual mode, stop it using “net stop wzcsvc” and disable other wireless adapter utilities.
  • Make sure you have only one wireless card in your computer. Note, disabling one of the wireless adapters will not work!
  • Make sure your wireless card is associated to a network. You can use wirelessutils provided with this package to connect to a network. The command is “WirelessUtils < unique_substring > setssid < ssid >< is/ah > -wep < disable/enable > -auth < open/shared > -key < key if using WEP >“. For example:
    • To connect my Intel 2200BG card to a WEP encrypted, shared authentication infrastructure network with ssid test, and WEP key 12345, the command is “WirelessUtils 2200BG setssid test IS -wep enable -auth share -key 12345“
    • The command is “WirelessUtils.exe 2200BG setssid test IS“, if the network did not use WEP
  • If you get an ndisuio error, type “net start ndisuio“
  • Note that VirtualWiFi will NOT work with networks using WPA based security.
  • Ensure that the device name of your wireless adapter has at least one of the following keywords: “cisco”, “orinoco”, “netgear”, “wlan” or “wireless”. If it does not, then refer to FAQ.

To install VirtualWiFi, open the command prompt, go to the directory where you unzipped the VirtualWiFi binaries, and type:

  • if using WEP: “VirtualWiFi install -wep < enable/disable > -auth < open/share > -key < KEY >“,
  • if not using WEP: “VirtualWiFi install -wep disable -auth open“.

Remember to press “Continue” if prompted for driver signing. If you face problems, refer to the VirtualWiFi installation FAQ.

To uninstall VirtualWiFi, open the command prompt, go to the directory where you unzipped the VirtualWiFi binaries, and type: “VirtualWiFi uninstall”Note that the wireless card over which you installed VirtualWiFi should be plugged in and enabled for uninstall to be successful. If you face problems, refer to the VirtualWiFi uninstallation FAQ.

Verifying a Correct Installation

A correct installation of VirtualWiFi should do the following:

  • Have a VirtualWiFi attribute in the Properties of all the adapters in the Network Connection window of XP.
  • This attribute should be checked for only the wireless adapter.
  • There should be exactly one VirtualWiFi Virtual Miniport in the Network Connections Window.
  • The VirtualWiFi Virtual Miniport should have the name “VirtualWiFi MM SSID” depending on the mode and SSID of the underlying adapter.
  • Finally, do the following to check if VirtualWiFi will work with your wireless adapter. See if the VirtualWiFi Virtual Miniport gets a valid DHCP address for the network you are currently connected to. If you are not using DHCP, then you should be able to ping machines on that network with your manual IP address. If this step does not work (see FAQ for reasons), then unfortunately you will have to wait for future releases of VirtualWiFi to use it over your card. In the meantime, do try VirtualWiFi over other supported cards.

A screen snapshot after installing VirtualWiFi shows the checked VirtualWiFi attribute for the Orinoco wireless card. It also shows the VirtualWiFi Virtual Miniport named “VirtualWiFi_IS_rover”, since the card was in IS mode, and the ssid was “rover”. (Note that for better viewing of this figure, you might want to watch it in its original size.)

Connecting to Multiple Networks Using VirtualWiFi

Steps on How to Use VirtualWiFi

The instructions on this page assume that you have correctly installed VirtualWiFi using the steps described in the VirtualWiFi install section.

  • To add another network, use: “VirtualWiFi addnetwork -ssid < ssid > -mode < mode > -wep < enable/disable > -auth < open/share > -key < KEY if using WEP>“, where < ssid > is the ssid of the network, and < mode > is the mode, either AH (ad hoc) or IS (infrastructure), of the network you want to add.
  • To remove connectivity to a network, use: “VirtualWiFi removenetwork -ssid < ssid > -mode < mode >“, where < ssid > is the ssid of the network, and < mode > is the mode, either AH (ad hoc) or IS (infrastructure), of the network you want to disconnect from.
  • To change parameters of a network, use: “VirtualWiFi changeparams -ssid < ssid > -mode < mode > -op < value >“, where < ssid > is the ssid of the network, and < mode > is the mode, either AH (ad hoc) or IS (infrastructure), of the network for which you want to change the parameter. The op is either:
    • switch : for the maximum time (in milliseconds) for your card to switch to this network. See FAQ on what are good values for this parameter.
    • wait : for the amount of time (in milliseconds) you want to stay in this network in addition to the time for switching to this network. The card waits for a wait time in addition to the switch time after switching to a network.
    • isAdapt : VirtualWiFi uses adaptive switching to determine the amount of time to stay on a network if this value is 1, and uses the values specified by the user if this value is 0. By default, VirtualWiFi uses adaptive switching.

An Example

If we were connected to an infrastructure network called rover, and wanted simultaneous connectivity to an ad hoc network with ssid VirtualWiFi, with non-adaptive switching, and a switch time of 500 ms for the infrastructure network, then our sequence of commands would be as follows:

  • net stop wzcsvc
  • VirtualWiFi install -wep disable -auth open
  • VirtualWiFi addnetwork -ssid MultiNet_AH -mode ah -wep enable -auth share -key ABCDE
  • VirtualWiFi changeparams -ssid rover -mode is -switch 500 -isadapt 0

In the screen snapshot after running the above commands, we see two new virtual adapters, with the following names: VirtualWiFi IS rover and VirtualWiFi AH MultiNet corresponding to the two networks. The task manager also shows the service, and the corresponding executable VirtualWiFiSvc.exe, which is created and started by the installer. The name of the service is VirtualWiFiService.

Tests for Checking Correctness

The following tests could be used to verify the correct operation of VirtualWiFi:

  • Check if you can independently associate with each network, and whether you get a valid IP address. This should be done before you install VirtualWiFi.
  • After installing VirtualWiFi, or after adding a network, check to see on the network connections window for virtual adapter corresponding to each connection, and if all virtual miniports get a valid IP address.
  • Our VirtualWiFihelper utility should also be used for verification with the following steps:
    • Check to see if VirtualWiFi is attempting to connect to the correct number of networks by using: “VirtualWiFihelper.exe -op getNumNetworks“
    • “VirtualWiFihelper.exe -op getssid” gives the SSID of the current network to which the card is connected. Periodically checking this value will inform you if the card is really switching across different SSIDs.
    • “VirtualWiFihelper.exe -op getmode” gives the current mode of the current network. Periodically executing this command will tell you if the card is really switching across different network modes.
    • “VirtualWiFihelper.exe -op getSwitchTime” and “VirtualWiFihelper.exe -op getWaitTime” can be used to verify that VirtualWiFi is using the correct parameters for different networks.
  • Ping machines on all the networks. This should be successful if VirtualWiFi is running correctly.

Our Experience with Different Wireless Cards

Supported Wireless Cards

VirtualWiFi works over the latest drivers of these wireless cards:

  • Lucent Orinoco Silver WiFi Card
  • Lucent WaveLAN IEEE 802.11b Silver
  • Lucent Orinoco Gold WiFi Card
  • Buffalo AirStation WLI-CB-B11
  • Compaq Wireless LAN W200
  • Netgear MA 521 Wireless PC Card
  • Cisco 340 Series 802.11b card
  • Netgear 802.11a/b Wireless Adapter WAG511
  • Netgear 802.11a/b Wireless Adapter WAB501

Wireless Cards Not Supported

VirtualWiFi worked over all the cards we tried. Let us know if VirtualWiFi does not work over any IEEE 802.11 card. To find out if your card supports VirtualWiFi, install VirtualWiFi and try the verification steps described in the VirtualWiFi Install section.

Building VirtualWiFi from Sources

Building VirtualWiFi from Sources

The following are required on the machine used for building VirtualWiFi:

  • A Windows DDK installation, with an XP build environment.
  • A Windows Platform SDK installation.
  • Define an environment variable called SDK_INCLUDE_PATH, which should point to the include path of the SDK installation. So, if on my machine SDK was installed in C:Program FilesWin-SDK, then SDK_INCLUDE_PATH would be defined as C:Progra~1Win-SDKinclude.

At this point, copy the VirtualWiFi sources. Unzip the contents to a directory, and go to that directory in the Windows XP Checked or Free build environment in DDK.Run build -ceZ, and this should compile the entire VirtualWiFi tree. Copy the following files required for installing VirtualWiFi to one directory:

  • drivervwifip.inf
  • drivervwifi_mp.inf
  • driverobjchki386vwifi.sys
  • notifyobobjchki386vwifi.dll
  • installobjchki386VirtualWiFi.exe
  • VirtualWiFihelperobjchki386VirtualWiFihelper.exe
  • Serviceobjchki386VirtualWiFiSvc.exe
  • WirelessUtilsobjchki386WirelessUtils.exe

We have provided a file called “copyobjchkfiles.bat” that will copy all the sys, dll and exe files into a directory called “installfiles”.

The VirtualWiFi Source Tree Structure

The VirtualWiFi source tree comprises the following directories:

  • driver: kernel functionality of VirtualWiFi
  • notifyob: notify object for maintaining the bindings of the VirtualWiFi driver
  • VirtualWiFihelper: utility required for checking the correct operation of VirtualWiFi
  • service: user-level VirtualWiFi service
  • install: command-line options for installing and using VirtualWiFi
  • inc: the include directory
  • WirelessUtils: command-line utility to connect your wireless card to a Wi-Fi network
  • RegDelete: utility to remove all VirtualWiFi registry entries (see README.txt for keys that are deleted)

Frequently Asked Questions

VirtualWiFi Frequently Asked Questions

Q: Why do we need VirtualWiFi? Why not use one wireless card for each network?

A: Using multiple cards will cost you more money and what is worse is that your machine will consume more energy (battery power). Also, in most legacy laptops, it is cumbersome to fit multiple cards.

Q: Could you briefly describe the working of VirtualWiFi?

A: The VirtualWiFi virtualization architecture exposes multiple virtual adapters, one for each wireless network to which connectivity is desired. It then uses a network hopping scheme that switches the wireless card across the desired wireless networks. The goal is to make the switching transparent to the user, such that he feels connected on all the wireless networks.

Q: Briefly, how is VirtualWiFi implemented?

A: VirtualWiFi is implemented as an NDIS intermediate driver, and a user-level service in Windows XP. VirtualWiFi interacts with the card device driver at the lower end, and network protocols at the upper end. The buffering protocol is implemented in the kernel, while the switching logic is implemented as a user-level service.

Q: Why not use a different design of VirtualWiFi, where we queue packets, and switch to the network over which the packet in the head of the queue is to be sent?

A: Switching the wireless card to another network incurs a significant overhead. Incurring this overhead for every packet will significantly degrade the performance of VirtualWiFi.

Q: Why does VirtualWiFi have to switch across different networks? Can’t nodes receive packets from other networks, if it is promiscuous mode?

A: Different networks could be on physically different channels. In such a case, nodes might not receive packets from other networks, even in promiscuous mode. Furthermore, if a node is not associated on a network, it is in media disconnected state, and will be unable to send any packets on the network. Therefore, VirtualWiFi has to switch and associate to a network in order to send and receive packets on it.

Q: What all is implemented in the current version of VirtualWiFi software?

A: The current version of the VirtualWiFi software allows a user to connect a WLAN card to multiple wireless networks. It dynamically adapts to the switching delay incurred by a wireless card, independent of the manufacturer. It also does not require manual intervention for assigning IP addresses on individual networks. Furthermore, this version of VirtualWiFi also provides users with a command-line interface to dynamically add and remove connectivity to a network. The adaptive scheduling technique described in the paper is also implemented.

Q: What all is NOT implemented in the current version of VirtualWiFi software?

A: However, some features of VirtualWiFi have only been prototyped, and not included in this release. In particular, the idea of using PSM and remote node buffering is not implemented. Users will notice hooks in the driver code to provide remote node buffering, but our user-level service currently does not support it. Similarly, although the VirtualWiFi kernel module has support for multiple WLAN cards, the VirtualWiFi service does not support it yet. Finally, we have not yet included support for WEP and 802.1X in the current VirtualWiFi software release.

Q: Is VirtualWiFi specific to IEEE 802.11, or can it be used with other schemes such as HomeRF, Bluetooth, etc.?

A: We believe that the VirtualWiFi idea can be applied to any standard. However, we have only tested our system with IEEE 802.11 cards.

Q: Can VirtualWiFi connect to two networks, such that one is IEEE 802.11a and the other is 802.11b?

A: Yes, if the underlying wireless card supports it. However, switching an A,B wireless card across the modes incurs a higher switch time, and will adversely affect the performance of VirtualWiFi.

Q: What is the time taken by a card to switch to another wireless network?

A: This number varies across cards. It also varies across networks, and across ad hoc and infrastructure networks. In our experience, switching delays vary from 100 ms to 600 ms across commercial cards. Over special Native WiFi cards, this delay was a few tens of ms. Ideally, as has been pointed out by recent research in solid state circuits, and the values that have been used in our SSCH paper, this switching delay should be of the order of 100 micro seconds.

VirtualWiFi Installation

Q: I am having problems installing VirtualWiFi. An error report comes up when I run “VirtualWiFi install”. No virtual miniport as shown in the screen snapshot comes up in the Network Connections window. However, there is an unchecked VirtualWiFi attribute in the properties of my wireless card. How should I fix this problem?

OR

Q: The device name of my wireless card does not have any keywords mentioned in the prerequisites. How do I use VirtualWiFi?

A: Copy the VirtualWiFi source code to a local directory. Open notifyobnotify.cpp, and in the lines 758-771, add for any word in your Wireless adapter, and include it in the condition. Note that this word should not be in any other network adapter. Recompile, and install VirtualWiFi. Read the documentation for building the binaries from the VirtualWiFi sources, and compile the software. You are all set!

Q: I see an extra virtual adapter for my Ethernet adapter?

A: Verify that none of the adapters in the “Network Connections” window of XP have a keyword mentioned for wireless adapters. If so, remove it as described in the previous answer.

Q: The installation just exits without any messages, but VirtualWiFi is not installed. Why does this happen?

A: This could happen due to three reasons. Firstly, check to see that you have administrative privileges on your machine. Secondly, VirtualWiFi will not be installed if your card is currently not connected to any network. Connect your card to any desired network before installing VirtualWiFi. The third reason is as follows. We have noticed this sympton on some machines, which occurs when VirtualWiFi is being installed for the first time on the machine. In such a case, you should do the following to overcome the problem. Go to Start->Control Panel->Network Connections->Wireless Connection, then right click to go to Properties->Install->Protocol->Have Disk and go to the directory where you have unzipped the binaries. Press “Continue” when asked about driver signing. Once installed, uninstall VirtualWiFi by going to Properties of the Wireless Adapter, or using “VirtualWiFi uninstall”. After uninstalling VirtualWiFi, subsequent installations can be done automatically using the “VirtualWiFi.exe install” command described in the install section.

Q: During installation I get an error message saying “couldn’t create service. The service has been marked for deletion”. How do I get over it?

A: Do a “VirtualWiFi uninstall”. Then go the Task Manager, and kill VirtualWiFiSvc.exe. The install after this should work.

Q: Why does VirtualWiFi not work with my card?

A: VirtualWiFi will not work over cards whose drivers don’t forward packets that have a source address. This functionality is required since VirtualWiFi virtual miniports already have a MAC address. Another reason VirtualWiFi could fail is when the wireless card does not support packet filters NDIS_PACKET_TYPE_DIRECTED and NDIS_PACKET_TYPE_BROADCAST.

Q: The “VirtualWiFi install” command never completes. It gets to a point, and continues to wait.

A: This happens on non-English versions of XP. You will have to manually install VirtualWiFi as described in the answer to the next question.

Q: Is there a manual way of installing VirtualWiFi, not through VirtualWiFi.exe?

A: Yes. Stop Wireless Zero Config, and then go to Start->Control Panel->Network Connections->Wireless Connection, then right click to go to Properties->Install->Protocol->Have Disk and then point to the directory where you unzipped the VirtualWiFi Binaries. Click on “Continue” when warned about driver signing. This will install VirtualWiFi. Rename the added virtual miniport to “VirtualWiFi MM SSID” where MM is the mode, and SSID is the current network SSID. Then install the VirtualWiFi service using: “VirtualWiFiSvc.exe -install”. Finally, for VirtualWiFi to work correctly across reboots, add an entry for network name, i.e. “VirtualWiFi MM SSID” in C:WindowsVirtualWiFiData.txt.

VirtualWiFi Uninstallation

Q: Why am I unable to uninstall VirtualWiFi? The uninstall command seems to hang.

A: This will happen if the VirtualWiFi service is not running. To start the service, either run “net start VirtualWiFiService”, OR “VirtualWiFiSvc.exe -start”. If VirtualWiFi Service is not installed, you could install it using “VirtualWiFiSvc.exe -install”.

Q: Is there a manual way to uninstall VirtualWiFi?

A: Yes. Go to Start->Control Panel->Network Connections->Wireless Connection, right click and and go to Properties. Click on VirtualWiFi Miniport Driver, and click Uninstall. Note that the VirtualWiFi Service should be running at this time. Once the driver is uninstalled, you should remove the service, by executing “net stop VirtualWiFiService””, followed by “VirtualWiFiSvc.exe -remove”.

Q: I am unable to uninstall VirtualWiFi. Nothing seems to work. Is there a brute force method?

A: Yes. Go to the Windows registry using Start->Run->”regedit”. Note that you will be modifying the registry at your own risk. It is always better to save a copy of the registry before modifying it. From the registry, look for all entries having VirtualWiFi, and delete them. This is better done in safe mode. Also run “VirtualWiFiSvc.exe -remove” to remove the service. We have provided an easier way to delete these registry entries. Follow these steps: (i) Run “VirtualWiFi uninstall” (ii) Reboot your machine (iii) Run “RegDelete”. Note you will have to delete one entry manually, which is prompted by RegDelete. (iv) Reboot, and you are all set! However, please use RegDelete carefully. Check carefully the entries that RegDelete prompts! It should not belong to another program, and correspond to README.txt in the RegEdit directory under Sources.

Using VirtualWiFi

Q: If VirtualWiFi automatically determines the switch time of a card, why is the switch time used in VirtualWiFi.exe changeparams important?

Microsoft Virtual Wifi Miniport Adapter Fix Download

A: Think of this value as a timeout value for switching a card to another network. Even if VirtualWiFi is unable to associate to another network, it still buffers packets sent on that network. These packets will be freed, only when the switch timeout is exceeded. In most cases, the timeout value used by default works well, and need not be changed.

Q: What is a good number for the switch time to use in VirtualWiFi.exe changeparams?

Tamil 2001 Movies Tamil 2000 Movies Tags: TamilRockers 2019, TamilRockers 2019 Movies, TamilRockers Tamil HD Movies Free Download, TamilRockers Tamil Movies Download. Tamilrockers full movies free download

A: This number varies across different cards, and across different implementations. For a Lucent card, you could use numbers around 400 ms to switch to an ad hoc network, and 500 ms to switch to an IS network. For Compaq WLAN cards, this number was worse, around 650 ms to switch to an IS network. Overall, our suggestion is to try a safe number.

Q: How do I find out the time my card takes to switch to a network?

A: We found this value using Airopeek, which is a wireless sniffer. However, you do not have to use this expensive tool. An easier way to measure this number is using the utility we provide with our distribution of VirtualWiFi, called VirtualWiFihelper.exe. The command VirtualWiFihelper.exe -op getCardSwitchTime gives the time taken by the card to switch to a network.

Q: Why does the card seem not to connect/stay on a network?

A: You should try increasing the switch time using “VirtualWiFi changeparams -switch “. Also make sure the wireless zero config is turned off, and you are able to connect to the network. A way to check for connectivity is by following these steps. Firstly, turn off the VirtualWiFi service, using “net stop VirtualWiFiService”. Then, turn on Wireless Zero Configuration, and try connecting to your network. Once you are done testing, turn off Zero Configuration, and turn on the VirtualWiFi service.

Q: Why do you ask me to stop wireless zero configuration service, and other wireless adapter utilities?

A: These utilities interact with the wireless card, and try to force connectivity to their preferred networks. This might interfere with the correct operation of VirtualWiFi.

Q: Why did my ad hoc network get a DHCP address, and not an autoconfig address?

A: In our current implementation of VirtualWiFi, all packets arriving at a wireless card are forwarded to the currently active virtual adapter. As soon as you start VirtualWiFi over an ad hoc network, the virtual adapter starts a DHCP request. In the non-VirtualWiFi scenario the card will get an autoconfig address after the DHCP request fails. If you started another network before the DHCP request timed out, it is possible for the card to receive a DHCP reply from another network and forward it to the incorrect virtual adapter. We suggest that the user wait for an ad hoc network to get a valid autoconfig address before it adds another network.

Q: Will VirtualWiFi work when I reboot, or unplug and replug my card?

A: Yes. It will automatically work after reboot. However, after an unplug and replug, you will have to manually restart the service using: “net stop VirtualWiFiService”, followed by “net start VirtualWiFiservice”.

Q: How does removing a network work across machine reboots?

A: On rebooting the machine, VirtualWiFi starts connecting to all networks, including the ones that were removed. You should explicitly add the networks you had removed, and remove them again to get back to a consistent state.

Q: My VirtualWiFi adapter always shows connectivity in the Network Connections window. Does it mean that my underlying card is able to successfully switch to that network?

A: No. VirtualWiFi stops MEDIA_DISCONNECT messages from going up (read paper for details). So, you will be unable to monitor the state of the network by looking at the Network Connections window. We recommend using “VirtualWiFihelper.exe -op getSSID” to check if VirtualWiFi is able to connect to a network.

Q: Is there a manual way, other than using VirtualWiFi.exe, to add a network?

A: Yes. First stop the VirtualWiFi Service by using “net stop VirtualWiFiService. Then connect your wireless card to the network you want to add, and do the following: Go to Start->Control Panel->Network Connections->Wireless Adapter, right click to go to Properties. Then high “VirtualWiFi Miniport Driver”, and go to its properties. Click on “Add a Miniport”, and press Continue if prompted for Driver Signing. Change the name of the newly added virtual miniport in the Network Connections window and make an entry in C:WindowsVirtualWiFiData.txt. Then start the VirtualWiFi Service using “net start VirtualWiFiService”, and your network has been added.

Q: Is there a manual way, other than using VirtualWiFi.exe, to remove a network?

Microsoft Virtual Wifi Miniport Adapter Fix 1

A: Yes. Stop the VirtualWiFi Service. Go to Start->Control Panel->Network Connections->VirtualWiFi adapter you want to remove. Right click, and press Disable. Then, start the VirtualWiFi Service. This will remove the miniport.

VirtualWiFi Source Code

Q: Why does DDK complain about undeclared SDK_INCLUDE_PATH when building the VirtualWiFi sources?

A: You need to define it to the path of SDK include files. Remember to handle blank spaces correctly. So, if on my machine SDK was installed in C:Program FilesWin-SDK, then SDK_INCLUDE_PATH would be defined as C:Progra~1Win-SDKinclude.

Q: How do I debug VirtualWiFi? Have you provided any hooks in the software?

A: The best way to debug VirtualWiFi is to use a Windows kernel debugger, such as Windbg. The code has DBGPRINT statements, with different verbosity level of debug messages to be printed. To debug the install/uninstall/addnetwork/removenetwork commands, you could use “VirtualWiFi.exe -v” instead of VirtualWiFi, for more debug output.

Q: Why is copyobjchkfiles.bat unable to copy files to the installfiles directory?

A: Depending on your settings, your obj directories in DDK might have a different name, for example objchk_wxp_x86, or something similar. Change objchk in copyobjchkfiles.bat to the directory in your setting. Copying will also not work if there is no directory called “installfiles”. You should create this directory first. Finally, files with similar names in “installfiles” should not have read-only permissions. This will also cause the copy to fail.

Q: Why am I unable to replace vwifi.dll after recompiling it?

A: Uninstall VirtualWiFi, if installed. You might have to wait for a few minutes. Close the Network connections Window and retry. You should be successful.

Papers and Talks

VirtualWiFi Documents: Papers, Presentations and Posters

On VirtualWiFi

Ranveer ChandraPhD Thesis, Cornell University, September 2005.

Ranveer Chandra, Paramvir Bahl and Pradeep BahlProceedings of IEEE Infocom 2004, Hong Kong, March 7-11, 2004.Infocom Presentation

Ranveer Chandra, Paramvir Bahl and Pradeep BahlDemo and Poster in ACM/USENIX MobiSys, San Francisco, May 5-8, 2003Poster in Mesh Networking Summit, Snoqualmie, WA, June 23-24, 2004

Paramvir Bahl, Pradeep Bahl and Ranveer ChandraMicrosoft Tech Report, MSR-TR-2003-46, June 2003

On the Applications of VirtualWiFi

Atul Adya, Paramvir Bahl, Ranveer Chandra and Lili QiuProceedings of ACM Mobicom, Philadelphia, September 26-30, 2004.

Paramvir Bahl, Ranveer Chandra and John DunaganPoster in Mesh Networking Summit, Snoqualmie, WA, June 23-24, 2004

Paramvir Bahl, Ranveer Chandra and John DunaganProceedings of ACM Mobicom, Philadelphia, September 26-30, 2004.Mobicom Presentation

Ranveer Chandra, Venkata N. Padmanabhan and Ming ZhangProceedings of ACM/USENIX MobiSys, Uppsala, Sweden, June 19-22, 2006.MobiSys Presentation

Paramvir Bahl, Ranveer Chandra, Patrick P. C. Lee, Vishal Misra, Jitendra Padhye, Dan Rubenstein and Yan YuProceedings of ACM CoNEXT, Madrid, Spain, December 9-12, 2008.

Collaborators

People Involved in the Design and Development of VirtualWiFi

This work has been done in collaboration with:

  • Ranveer Chandra Researcher, Networking Research Group, Microsoft Research
  • Victor Bahl Senior Researcher, Microsoft Research Group Manager, Networking Research Group, Microsoft Research
  • Pradeep Bahl Architect, Microsoft Windows Product Division
  • Ken Birman Professor, Department of Computer Science, Cornell University

We have also worked with researchers at Microsoft Research on different applications of VirtualWiFi. In particular, we have worked with Atul Adya on Client Conduit, John Dunagan on SSCH, and Venkat Padmanabhan and Ming Zhang on WiFiProfiler.

Press

VirtualWiFi received some press coverage in late October, 2005. Some of the articles are linked below:

  • Slashdot: “This shows that even Microsoft can pull some really neat things out of its R&D division.”
  • Engadget: “Just to remind all the haters that Google Labs isn’t the only research game in town, Microsoft Research has just busted out VirtualWiFi.”
  • eWEEK: “We’re still studying the implications of this.”
  • TECHWORLD: “Virtual WiFi doubles your adapter.”
  • FierceWiFi: “VirtualWiFi connects one device to multiple networks.”
  • PCQuest: “VirtualWiFi lets users of Win XP connect simultaneously to several wireless networks.”
  • The Royal Gazette, Bermuda: “Do you like to be on the cutting edge of software? Microsoft has released version 1.0 of its experimental VirtualWiFi software.”
  • Geek.com: “Having multiple wireless connections through a single card could make for some very positive results for home and small business users.”
  • NETWORKWORLD: “VirtualWiFi is a virtualization architecture for wireless LAN cards.”
  • Wi-Fi Planet: “It abstracts a single WLAN card to appear as multiple virtual WLAN cards to the user.”
  • MS News: “Virtual WiFi the way of the future!!”
  • ExtremeMesh: “Microsoft Tests ‘Virtual Wi-Fi’ Software.”
  • SecGuru: “VirtualWiFi – Virtualization Architecture for WLAN”
  • BetaNews: “Engineers at Microsoft Research have released a new software tool that enables a computer to connect to multiple Wi-Fi networks simultaneously.”
  • AnandTech: “Well finally, this idea might be worth it”
  • Yahoo News (French): “VirtualWiFi : plusieurs réseaux sans fil, une seule carte.”